Laser Spare Parts

Product Details:

 

Additional Information:

• Delivery Time: 3-4 DAYS
• Packaging Details: BOX

Product Details:

A CO2 laser cutting machine belt typically refers to a timing belt used in the motion system of the laser cutting machine. This belt is critical in transferring power from the motor to the moving parts of the machine, especially the gantry or X-Y axis that holds and moves the laser head.Here are some important aspects of CO2 laser cutting machine belts:1. Function of the BeltMovement Control: The belt ensures the precise and accurate movement of the laser head over the material.Power Transmission: It transmits the rotational motion of the stepper or servo motor to the laser head’s motion system.Positioning Accuracy: Proper tension and quality of the belt ensure the accuracy of the cuts and engravings.2. Types of BeltsTiming Belt (GT2, GT3, etc.): These are the most common types, where the teeth of the belt mesh with the corresponding teeth on the pulley to prevent slippage and ensure accurate movement.Material: Most CO2 laser machines use rubber or polyurethane belts reinforced with materials like fiberglass or steel to enhance strength and durability.3. Importance of Belt MaintenanceProper Tension: Over-tightening or under-tightening the belt can lead to issues like poor cut quality, missed steps, or even damage to other machine components.Belt Wear: Over time, belts can wear out or become damaged, leading to slipping, misalignment, or reduced cutting accuracy. Regular inspection is necessary to ensure the machine's optimal performance.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box

Product Details:

Co2 Water Flow switch is used for water circulation control, water inlet and outlet control, water heating control, water pump switch control, solenoid valve on/off control or water outlet and power supply, and water supply control for water heaters, air conditioners and other water systems. A sensor device that converts a water stream in to a switched electrical signal.

AC110V 0.2A Water Protection Switch for Laser Cutting Machines
The protection switch can prevent the beam out without going through cool water, in case the laser tube bursts out without enough water.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box

Product Details:

 

Additional Information:

• Delivery Time: 3-4 Days
• Packaging Details: Box

Product Details:

WE HAVE CO2 LASER CUTTING MACHINE OF 9060, 1390, 1410, 1610, 1313, 1325 AND OTHER SIZES
Established in The Year 2015 Rishabh techno solutions Is a Distinguished Wholesale Trader Of Laser Tube, Laser Controller, Laser Lens, etc. We direct all our activities to cater the expectations of customers by providing them excellent quality products as per their gratification. Moreover, we follow moral business policies and crystal pure transparency in all our transactions to keep healthy relations with the customers.

Additional Information:

• Delivery Time: 3-4 Days
• Packaging Details: Box

Product Details:

Product Details:

Rishabh Techno Solutions 
CO₂ Laser Power Cables are designed to safely and efficiently connect your CO₂ laser tube to the power supply, ensuring stable performance and long service life.

Additional Information:

• Delivery Time: 3-4 DAYS
• Packaging Details: BOX

Product Details:

A CO2 laser cutting machine belt typically refers to a timing belt used in the motion system of the laser cutting machine. This belt is critical in transferring power from the motor to the moving parts of the machine, especially the gantry or X-Y axis that holds and moves the laser head.Here are some important aspects of CO2 laser cutting machine belts:1. Function of the BeltMovement Control: The belt ensures the precise and accurate movement of the laser head over the material.Power Transmission: It transmits the rotational motion of the stepper or servo motor to the laser head’s motion system.Positioning Accuracy: Proper tension and quality of the belt ensure the accuracy of the cuts and engravings.2. Types of BeltsTiming Belt (GT2, GT3, etc.): These are the most common types, where the teeth of the belt mesh with the corresponding teeth on the pulley to prevent slippage and ensure accurate movement.Material: Most CO2 laser machines use rubber or polyurethane belts reinforced with materials like fiberglass or steel to enhance strength and durability.3. Importance of Belt MaintenanceProper Tension: Over-tightening or under-tightening the belt can lead to issues like poor cut quality, missed steps, or even damage to other machine components.Belt Wear: Over time, belts can wear out or become damaged, leading to slipping, misalignment, or reduced cutting accuracy. Regular inspection is necessary to ensure the machine's optimal performance.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

A CO2 laser cutting machine belt typically refers to a timing belt used in the motion system of the laser cutting machine. This belt is critical in transferring power from the motor to the moving parts of the machine, especially the gantry or X-Y axis that holds and moves the laser head.Here are some important aspects of CO2 laser cutting machine belts:1. Function of the BeltMovement Control: The belt ensures the precise and accurate movement of the laser head over the material.Power Transmission: It transmits the rotational motion of the stepper or servo motor to the laser head’s motion system.Positioning Accuracy: Proper tension and quality of the belt ensure the accuracy of the cuts and engravings.2. Types of BeltsTiming Belt (GT2, GT3, etc.): These are the most common types, where the teeth of the belt mesh with the corresponding teeth on the pulley to prevent slippage and ensure accurate movement.Material: Most CO2 laser machines use rubber or polyurethane belts reinforced with materials like fiberglass or steel to enhance strength and durability.3. Importance of Belt MaintenanceProper Tension: Over-tightening or under-tightening the belt can lead to issues like poor cut quality, missed steps, or even damage to other machine components.Belt Wear: Over time, belts can wear out or become damaged, leading to slipping, misalignment, or reduced cutting accuracy. Regular inspection is necessary to ensure the machine's optimal performance.4. Common ProblemsBelt Slippage: When the belt slips, it can cause inaccuracies or uneven movement, affecting the quality of cuts.Worn Teeth: The teeth of the belt can wear down, reducing their grip and causing issues with precision.Misalignment: Misalignment of the belt or pulley can lead to uneven movement, which impacts the cut's accuracy.5. Replacing or Adjusting the BeltReplacement: If the belt is worn or damaged, it should be replaced to prevent further issues. Ensure to use a belt with the correct specifications for your specific CO2 laser machine model.Adjustment: Periodically check the belt tension and adjust it as necessary according to the machine's manual.If you're looking for a specific type of belt for a CO2 laser cutter or need help with replacing it, knowing the model of your machine and the type of belt it uses (e.g., GT2, GT3) is essential.

Product Details:

A CO2 laser cutting machine belt typically refers to a timing belt used in the motion system of the laser cutting machine. This belt is critical in transferring power from the motor to the moving parts of the machine, especially the gantry or X-Y axis that holds and moves the laser head.Here are some important aspects of CO2 laser cutting machine belts:1. Function of the BeltMovement Control: The belt ensures the precise and accurate movement of the laser head over the material.Power Transmission: It transmits the rotational motion of the stepper or servo motor to the laser head’s motion system.Positioning Accuracy: Proper tension and quality of the belt ensure the accuracy of the cuts and engravings.2. Types of BeltsTiming Belt (GT2, GT3, etc.): These are the most common types, where the teeth of the belt mesh with the corresponding teeth on the pulley to prevent slippage and ensure accurate movement.Material: Most CO2 laser machines use rubber or polyurethane belts reinforced with materials like fiberglass or steel to enhance strength and durability.3. Importance of Belt MaintenanceProper Tension: Over-tightening or under-tightening the belt can lead to issues like poor cut quality, missed steps, or even damage to other machine components.Belt Wear: Over time, belts can wear out or become damaged, leading to slipping, misalignment, or reduced cutting accuracy. Regular inspection is necessary to ensure the machine's optimal performance.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box

Product Details:

Laser Tube Power Supply: HY-T80 Laser Power Source is designed for 60W and 80W 100wcutting and engraving acrylic, fabric, double color sheet and rubber, etc.
Hy- Power Supply System

Additional Information:

• Delivery Time: 2-3days
• Packaging Details: box

Product Details:

CW 5000 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box

Product Details:

The laser machine focus head is a critical component in various laser systems, such as those used in laser cutting, engraving, and marking. Its primary role is to focus the laser beam onto the workpiece, ensuring precision and optimal performance. Here’s a breakdown of its key aspects:1. FunctionBeam Focusing: The focus head ensures that the laser beam is properly focused onto the material's surface to achieve the desired effect, whether cutting, engraving, or marking.Adjustability: Many focus heads allow users to adjust the focal length for different materials or tasks. This can either be manual or automatic depending on the machine design.2. Components of a Focus HeadLenses: The focus head typically incorporates lenses that help in focusing the laser beam. The type of lens (e.g., convex) and its focal length are selected based on the specific needs of the operation.Focal Point: The point where the laser beam is concentrated on the material’s surface is critical for achieving precise cuts or engravings. Properly setting the focal point is essential for both the quality of the cut and the efficiency of the process.Collimating Lens: In some systems, a collimating lens is used to focus the laser beam before it is directed through the focus lens to the material.Nozzle: Some focus heads also include a nozzle that directs gas (such as nitrogen or oxygen) onto the material to assist in cutting or cooling.3. Types of Focus HeadsFixed Focus: These heads have a predetermined focus distance. The lens cannot be moved to adjust focus, so the workpiece must be positioned within a specific range.Adjustable Focus: These heads allow for manual or automatic adjustment of the focal length, offering greater flexibility for different materials and processes.Motorized Focus: More advanced systems may include motorized focus heads that automatically adjust based on the material or cutting conditions. These are typically seen in high-end laser cutting or engraving machines.4. ApplicationsLaser Cutting: A focused laser beam melts, burns, or vaporizes material in a precise path to cut through it.Laser Engraving: A focused beam is used to mark or etch patterns or text onto materials, providing high detail and clarity.Laser Marking: A focused laser creates permanent marks (like serial numbers or logos) on materials without cutting or engraving deeply into them.5. MaterialsFocus heads can be used with a variety of materials, including metals, plastics, wood, ceramics, and glass. The correct adjustment of focus can make a significant difference in the quality of the cut or engraving.6. Considerations for Laser Focus Head MaintenanceLens Cleaning: The lenses in the focus head can accumulate dust or debris, which may degrade the laser beam’s performance. Regular cleaning is necessary.Alignment: Ensuring that the focus head is properly aligned with the laser source is crucial to maintaining cutting or engraving accuracy.Wear and Tear: Over time, the lenses and components of the focus head may degrade due to intense heat or use, and replacement may be required.Would you like specific details about a certain type of laser focus head or maintenance tips?

Additional Information:

• Production Capacity: 24 hour
• Delivery Time: 1- 2 Days
• Packaging Details: Box Packing

Product Details:

 Air Compressor Power Pump

Product Details:

Air Compressor Pump

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

Air Compressor Power Pump

Additional Information:

• Delivery Time: 2-3days
• Packaging Details: box

Product Details:

Air Power Pump

Additional Information:

• Delivery Time: 2-3days
• Packaging Details: box

Product Details:

Co2 Laser Air Compressor Pump

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

An acrylic bender is a tool used to heat and bend acrylic sheets. It is commonly used in various applications, including crafting, sign-making, and fabrication.
Acrylic Bender Tool

Additional Information:

• Delivery Time: 2-3days
• Packaging Details: box

Product Details:

EFR Laser Tube 150W is a type of CO2 laser tube that is typically used for laser engraving and cutting machines. These tubes are designed to produce high-quality laser beams, which can be used for various applications, such as engraving on wood, acrylic, leather, and cutting materials like wood, plastics, and other non-metallic surfaces.
Model number- F-8 EFR
Lenght-            1850mm
Diameter-         80mm
Brand-              EFR laser Tube 
Usage Application laser Machine

Additional Information:

• Delivery Time: 2-3days
• Packaging Details: box

Product Details:

 

Additional Information:

• Delivery Time: 3-4 Days
• Packaging Details: Box

Product Details:

Additional Information:

• Delivery Time: 3-4 DAYS
• Packaging Details: BOX

Product Details:

Main Features

• Compact refrigeration type industrial chiller
• Specially designed for cooling CO2 laser tube
• High precision +/- 0.3 degree C temperate control
• Long working life and simple operation
• Equipped with compressor time-delay protection, compressor over-current protection, water flow alarm and over high / low temperature alarm
• CE and RoHS certified
• Customizable power supply: 110 V or 220 V
• Optional heater and water filters
• Refrigerant: R-134a
• Net weight: 58 lbs (26 KG )
• Gross weight: 69 lbs (31 KG)
• Dimension: 22" x 11.2" x 18"
• Compatible laser tube wattage: <= 130W

Additional Information:

• Delivery Time: 3 DAY
• Packaging Details: BOX

Product Details:

Rishabh Techno Solutions The laser head precisely focuses the CO₂ laser beam for accurate cutting and engraving. Paired with a durable mount, it ensures stable alignment and smooth movement across materials. Designed for high precision, it supports various lenses and nozzles, making it ideal for acrylic, wood, leather, and fabric applications

Product Details:

 

Additional Information:

• Delivery Time: 3-4 Days
• Packaging Details: Box

Product Details:

Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions;.

Request
Callback

Additional Information:

• Delivery Time: 3-4 DAYS
• Packaging Details: BOX

Product Details:

CW 5200 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.
We are offering Water Chiller CW5200 to our clients.
Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

CW 5200 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.
We are offering Water Chiller CW5200 to our clients.
Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

CW 5200 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.
We are offering Water Chiller CW5200 to our clients.
Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions

Product Details:

CW 5200 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.
We are offering Water Chiller CW5200 to our clients.
Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

CW 5200 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.
We are offering Water Chiller CW5200 to our clients.
Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions

Additional Information:

• Delivery Time: 2-3days
• Packaging Details: box

Product Details:

CW 5200 Water Chiller is a popular cooling unit designed to maintain an optimal operating temperature for various industrial and laboratory equipment. It is commonly used in applications where precision temperature control is crucial, such as in laser systems, CNC machines, and medical equipment.
We are offering Water Chiller CW5200 to our clients.
Description

• Radiating capacity: 50W / °C.
• Small thermolysis water cooler, energy saving, long working life and simple operation;.
• With completed water flow and over high temperature alarm functions

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

Co2 Water Flow switch is used for water circulation control, water inlet and outlet control, water heating control, water pump switch control, solenoid valve on/off control or water outlet and power supply, and water supply control for water heaters, air conditioners and other water systems. A sensor device that converts a water stream in to a switched electrical signal.

AC110V 0.2A Water Protection Switch for Laser Cutting Machines
The protection switch can prevent the beam out without going through cool water, in case the laser tube bursts out without enough water.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box

Product Details:

Description:
AC110V 0.2A Water Protection Switch for Laser Cutting Machines
The protection switch can prevent the beam out without going through cool water, in case the laser tube bursts out without enough water.

Co2 Water Flow switch is used for water circulation control, water inlet and outlet control, water heating control, water pump switch control, solenoid valve on/off control or water outlet and power supply, and water supply control for water heaters, air conditioners and other water systems. A sensor device that converts a water stream in to a switched electrical signal.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

Description:
AC110V 0.2A Water Protection Switch for Laser Cutting Machines
The protection switch can prevent the beam out without going through cool water, in case the laser tube bursts out without enough water.

Co2 Water Flow switch is used for water circulation control, water inlet and outlet control, water heating control, water pump switch control, solenoid valve on/off control or water outlet and power supply, and water supply control for water heaters, air conditioners and other water systems. A sensor device that converts a water stream in to a switched electrical signal.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: Box

Product Details:

Description:
AC110V 0.2A Water Protection Switch for Laser Cutting Machines
The protection switch can prevent the beam out without going through cool water, in case the laser tube bursts out without enough water.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

SPT Laser tubes are glass tubes used in High-power laser machines for a variety of applications including laser ,cutting, engraving
drilling , marking 

• FeaturesSPT laser tubes are known for their high optical quality, strong cutting force, and stability. Some SPT laser tubes have a coaxial red light indicator that helps with optical path adjustment. 

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box

Product Details:

SPT Laser tubes are glass tubes used in High-power laser machines for a variety of applications including laser ,cutting, engraving
drilling , marking 

• FeaturesSPT laser tubes are known for their high optical quality, strong cutting force, and stability. Some SPT laser tubes have a coaxial red light indicator that helps with optical path adjustment. 

Additional Information:

• Delivery Time: 2- 3days
• Packaging Details: box

Product Details:

SPT Laser tubes are glass tubes used in High-power laser machines for a variety of applications including laser ,cutting, engraving
drilling , marking 

• FeaturesSPT laser tubes are known for their high optical quality, strong cutting force, and stability. Some SPT laser tubes have a coaxial red light indicator that helps with optical path adjustment. 

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: box