Product Details:
Minimum Order Quantity | 1 Piece |
Model Type | CE7000-60 |
Brand | Graphtec |
Model Name/Number | CE7000-60 |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Product description | Graphtec latest cutting plotter |
Configuration | accurate 5m length cutting. |
Blade Types | Supersteel |
Buffer Memory | 2 MB |
Command Sets | GP-GL / HP-GL(TM) emulation (Set by command or auto-detect) |
Cutting Force | 4.41N (450gf) |
Display | 3.7 inch LCD display |
Model Type | Graphtec CE7000-60 Plus |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Driven Type | Electric |
Classification | Single-blade Cutter |
Max Cutting Width | (603 mm x 50 m) (*1) |
Blade Material | Stainless Steel |
Weight | Approx. 46.29 lb (including stand 17.85 lb) |
Mountable Media Width | Min 50 mm to Max 712 mm |
Number Of Push Rollers | 2 |
Operating Environment | 10 to 35 degree C,35 to 75 % R.H. (non-condensing) |
Brand | Graphtec |
Frequency | 50-60 Hz |
Maximum Cutting Speed | 900 mm/s,at 45 Degree angle |
Phase | Single Phase |
Cutting area of Guaranteed Accuracy | (584 mm x 5 m) (when using the basket) |
Maximum Acceleration | 69.55 ft (21.2 m/s2),at 45 degree direction |
Maximum Cutting Force | 4.41 N (450 gf) in 38 steps |
Additional Information:
Product Details:
Brand | Graphtec |
Model Type | CE7000-60 |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Model Name/Number | CE7000-60 |
Product description | Graphtec latest cutting plotter |
Configuration | accurate 5m length cutting. |
Blade Types | Supersteel |
Buffer Memory | 2 MB |
Command Sets | GP-GL / HP-GL(TM) emulation (Set by command or auto-detect) |
Cutting Force | 4.41N (450gf) |
Display | 3.7 inch LCD display |
Model Type | Graphtec CE7000-60 Plus |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Driven Type | Electric |
Classification | Single-blade Cutter |
Max Cutting Width | (603 mm x 50 m) (*1) |
Blade Material | Stainless Steel |
Weight | Approx. 46.29 lb (including stand 17.85 lb) |
Mountable Media Width | Min 50 mm to Max 712 mm |
Number Of Push Rollers | 2 |
Operating Environment | 10 to 35 degree C,35 to 75 % R.H. (non-condensing) |
Brand | Graphtec |
Frequency | 50-60 Hz |
Maximum Cutting Speed | 900 mm/s,at 45 Degree angle |
Phase | Single Phase |
Cutting area of Guaranteed Accuracy | (584 mm x 5 m) (when using the basket) |
Maximum Acceleration | 69.55 ft (21.2 m/s2),at 45 degree direction |
Maximum Cutting Force | 4.41 N (450 gf) in 38 steps |
Product Details:
Minimum Order Quantity | 1 Piece |
Power Consumption | Max. 110 watts |
Mechanical Resolution | 0.006 mm |
Power Supply | 100~240 VAC 50 / 60 Hz (auto switching) |
Dimension | 412 x 950 x 486 mm, 16.2 x 37.4 x 19.1 inch |
Net Weight | 18 kg/ 39.6 lb |
Temperature | 15 deg C~30 deg C / 60 deg F~86 deg F |
Humidity | 25% ~ 75% |
Diameter of Blade | 2.5 mm |
Control Panel | LCD (20 digits x 2 lines), 14 Keys, 1 Power LED |
Repeatability | +-0.1 mm |
Distance Accuracy | +-0.254 mm or +-0.1% of move, whichever is greater |
Software Resolution | 0.025 mm |
Memory Buffer | 32 MB /16 MB (when using AAS) |
Acceleration | 4.2 G (gravity) |
Max Cutting Speed | 1530 mm/sec (60 ips) (at 45 deg direction) |
Max Cutting Force | 600g |
Acceptable Material Thickness | 0.8 mm (0.03") |
Number of Pinch Rollers | 3 |
The all-new Jaguar V series of vinyl cutting plotters includes the Jaguar V models (J5-61, J5-101 and J5-132), and Jaguar V LX models (J5-61LX, J5-101LX, J5-132LX and J5-183LX) . With intuitive features to meet the demands of today''s professionals, the Jaguar V series represents the apex of vinyl cutting plotter technology.
Product Details:
Minimum Order Quantity | 1 Piece |
Driven Type | Electric |
Brand/Make | GCC |
Blade Material | Stainless Steel |
Classification | Single-blade Cutter |
Size | 24 inch |
Surface Treatment | Color Plated |
Model No. | J5-61 | J5-101S | J5-132S | J5-183S | |
Operational Method | Roller-Type | ||||
Max. Cutting Width | 610 mm (24") | 1016 mm (40") | 1320 mm (52") | 1830 mm (72") | |
Max. Media Loading Width | 770 mm (30.3") | 1270 mm (50") | 1594 mm (62.8") | 1900 mm (74.8") | |
Min. Media Loading Width | 50 mm (1.97") | 300 mm (11.8") | |||
Number of Pinch Rollers | 3 | 4 | 6 | ||
Max. Media Thickness | 0.8 mm (0.03 in) | ||||
Drive | DC Servo Control | ||||
Max. Cutting Force | 600 gram | ||||
Max. Cutting Speed | 1530 mm /sec (60 ips) | ||||
Acceleration | 3 G (gravity) | ||||
Offset | 0~1.0 mm (with an increase of 0.025 mm) | ||||
Memory Size | 32 MB (J5) / 16 MB (J5LX) | ||||
Interfaces | USB 2.0 (Full Speed) , Serial (RS-232) and Ethernet | ||||
Commands | HP-GL, HP-GL/2 | ||||
Mechanical Resolution | 0.00625 mm | ||||
Software Resolution | 0.025 mm | ||||
Curve & Arc Smoothing | Yes | ||||
Configurable Origin | Yes | ||||
Test Cut capability | Yes | ||||
Tangential Mode | Yes | ||||
Repeat | Yes | ||||
Copy | Yes | ||||
Pouncing | Yes | ||||
Pause and Move | Yes | ||||
Control Panel | LCD (20 digits x 2 lines), 14 Keys , 1Power LED | ||||
Power Supply | AC 100-240V, 50~60 Hz (auto switching) | ||||
Power Consumption | 110 watts Max. | ||||
Dimension (H x W x D) mm | 414x930x490 16.3"x36.6"x19.2" | 1166x1430x667 45.9"x56"x26.3" | 1166x1754x667 45.9"x69.1"x26.3" | 750x2170x1160 29.5"x85.4"x45.7 |
Product Details:
Minimum Order Quantity | 1 Piece |
Model Type | CE7000-60 |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Blade Types | Supersteel |
Buffer Memory | 2 MB |
Command Sets | GP-GL / HP-GL(TM) emulation (Set by command or auto-detect) |
Cutting Force | 4.41N (450gf) |
Display | 3.7 inch LCD display |
Model Type | Graphtec CE7000-60 Plus |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Driven Type | Electric |
Classification | Single-blade Cutter |
Max Cutting Width | (603 mm x 50 m) (*1) |
Blade Material | Stainless Steel |
Weight | Approx. 46.29 lb (including stand 17.85 lb) |
Mountable Media Width | Min 50 mm to Max 712 mm |
Number Of Push Rollers | 2 |
Operating Environment | 10 to 35 degree C,35 to 75 % R.H. (non-condensing) |
Brand | Graphtec |
Frequency | 50-60 Hz |
Maximum Cutting Speed | 900 mm/s,at 45 Degree angle |
Phase | Single Phase |
Cutting area of Guaranteed Accuracy | (584 mm x 5 m) (when using the basket) |
Maximum Acceleration | 69.55 ft (21.2 m/s2),at 45 degree direction |
Maximum Cutting Force | 4.41 N (450 gf) in 38 steps |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Type | CE7000-60 |
Brand | Graphtec |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Model Name/Number | CE7000-60 |
Product description | Graphtec latest cutting plotter |
Configuration | accurate 5m length cutting. |
Blade Types | Supersteel |
Buffer Memory | 2 MB |
Command Sets | GP-GL / HP-GL(TM) emulation (Set by command or auto-detect) |
Cutting Force | 4.41N (450gf) |
Display | 3.7 inch LCD display |
Model Type | Graphtec CE7000-60 Plus |
Voltage | 100 to 120,200 to 240 V AC (Auto switch) |
Driven Type | Electric |
Classification | Single-blade Cutter |
Max Cutting Width | (603 mm x 50 m) (*1) |
Blade Material | Stainless Steel |
Weight | Approx. 46.29 lb (including stand 17.85 lb) |
Mountable Media Width | Min 50 mm to Max 712 mm |
Number Of Push Rollers | 2 |
Operating Environment | 10 to 35 degree C,35 to 75 % R.H. (non-condensing) |
Brand | Graphtec |
Frequency | 50-60 Hz |
Maximum Cutting Speed | 900 mm/s,at 45 Degree angle |
Phase | Single Phase |
Cutting area of Guaranteed Accuracy | (584 mm x 5 m) (when using the basket) |
Maximum Acceleration | 69.55 ft (21.2 m/s2),at 45 degree direction |
Maximum Cutting Force | 4.41 N (450 gf) in 38 steps |
Product Details:
Minimum Order Quantity | 1 Piece |
Drive | DC Servo Control |
Cutting Force | 0-600g |
Max. Cutting Speed | 1530mm / sec (60ips, Diagonal) |
Acceleration | 4.2G (gravity) |
Model | JR-61 | JR-76S | JR-101S | JR-132S |
Operational Method | Roller - Type | |||
Max. Cutting Width | 610mm (24in) | 760mm(29.9in) | 1016mm(40in) | 1320mm(52in) |
Max. Media Loading Width | 770mm (30.3in) | 920mm (36.22in) | 1270mm (50in) | 1594mm (62.75in) |
Number of Pinch Rollers | 3 | 4 | ||
Min. Media Loading Width | 50mm(1.97in) | |||
Acceptable Material Thickness | 0.8mm (0.03in) | |||
Distance Accuracy | 0.254mm or 0.1% of move, whichever is greater | |||
Offset | 0-1.0mm (With an increase of 0.025mm) | |||
Mechanical Resolution | 0.00625mm | |||
Software Resolution | 0.025mm | |||
Repeatability | 0.1mm | |||
Buffer size | 4MB | |||
Interfaces | USB, Parallel and Serial ( RS-232 C ) | |||
Commands | HP-GL, HP - GL/2 | |||
Configurable Origin | Yes | |||
Tangential-emulation | Yes | |||
Media Basket | Optional | |||
Curve Arc Smoothing | Yes | |||
Test Cut Possibility | Yes | |||
Re plot Function | Yes | |||
Copy Function | Yes | |||
Pouncing Function | With Optional Tool | |||
Control Panel | LCM (20digits x 2 lines), 14Keys, 1 Power LED | |||
Dimension (H x W x L) mm | 414mm x 930mm x 490 mm | 1166mm x1080mm x 667mm | 1166mm x1430mm x 667 mm | 1166mm x1754mm x 667 mm |
Dimension (H x W x L) in | 16.3" x 36.6" x 19.2" | 45.9" x 42.5" x 26.3" | 45.9" x 56" x 26.3" | 45.9" x 69.1" x 26.3" |
Net Weight kg/pound | 37.2kg / 82Ib | 40.5kg / 89.3Ib | 53.3kg / 117.5Ib | 61kg / 134.5Ib |
Product Details:
Minimum Order Quantity | 1 Piece |
Mechanical resolution | 0.006 mm |
Acceptable Material Thickness | 0.8 mm (0.03") |
Software Resolution | 0.025 mm |
Drive | DC Servo Control |
Max Cutting Force | 600g |
Max Cutting Speed | 1530 mm/sec (60 ips) (at 45 Deg. direction) |
Acceleration | 4.2 G (gravity) |
Offset | 0~1.0 mm (with an increase of 0.025mm) |
Memory Buffer | 32 MB /16 MB (when using AAS) |
Interfaces | USB 2.0 (Full Speed) and Serial (RS-232), and Ethernet |
Type of Command | HP-GL, HP-GL/2 |
Jaguar V Series | J5-61 | J5-101 | J5-132 | J5-160-P | |
J5-61LX | J5-101LX | J5-132LX | J5-183LX | ||
Operational Method | Roller-Type | ||||
Max. Cutting Width | 610 mm (24”) | 1016mm (40”) | 1320mm (52”) | 1830 mm (72”) | 1570mm (62in) |
Max. Media Loading Width | 770mm (30.3") | 1270mm (50") | 1594mm (62.75") | 1990mm (78.3") | 1782mm (70.2in) |
Min. Media Loading Width | 50 mm (1.97”) | 300mm (11.8") | 250mm (9.8in) | ||
Number of Pinch Rollers | 3 | 4 | 6 | ||
Stand | Optional | Standard | |||
Media Basket | Optional | N/A | |||
Media Take-up System | N/A | Standard | |||
Dimension (H x W x D) mm | 412 * 950 * 486 | 1096 * 1450 * 651 | 1111 * 1774 * 651 | 1127 * 2170 * 756 | 1127 * 1962 * 756 |
16.2 * 37.4 * 19.1 | 43.1 * 57 * 25.6 | 43.7 * 69.8 * 25.6 | 44.4 * 85.4 * 29.8 | 44.4 * 77.2 * 29.8 | |
Net Weight | 18 kg/ 39.6 lb | 41.5 kg/ 91.4 lb | 50 kg/ 110.2 lb | 63 kg/ 138.6 lb | 77.5 kg/ 170.86 lb |
Temperature | 15° C~30° C / 60°F~86° F | ||||
Distance Accuracy | ±0.254 mm or ±0.1% of move, whichever is greater | ||||
Repeatability | ±0.1 mm | ||||
Humidity | 25% ~ 75% | ||||
Automatic-Aligning System (AAS II) | Available on Jaguar V LX models, including Segmental Positioning and Auto Rotation functions | ||||
Auto Rotation | Available on Jaguar V LX models |
Product Details:
Minimum Order Quantity | 1 Piece |
Driven Type | Electric |
Blade Material | Stainless Steel |
Classification | Single-blade Cutter |
Power source | Electric |
Series | J5 |
Surface Treatment | Color Plated |
Product description:
We are engaged in offering a quality approved range of GCC Jaguar Cutting Plotter.Product Details:
Minimum Order Quantity | 1 Piece |
Model | Jaguar |
Blade Material | Stainless Steel |
Brand | GCC |
Driven Type | Electric |
Classification | Single-blade Cutter |
Motor Drive | DC Servo Control |
Specifications:
Operational Method: Roller-Type
Max. Cutting Width: 610 mm (24 in.)
Max. Cutting Length: 770 mm (30.3 in.)
Max. Media Loading Width: 300 mm (11.8 in.)
Min. Media Loading Width: 50 mm (1.97 in.)
Maximum Media Thickness: 0.8 mm (0.03 in.)
Number of Pinch Rollers: 3
Acceptable Material Thickness: 0.8 mm (0.03 in.)
Motor Drive: DC Servo Control
Max. Cutting Speed: 1530 mm/sec (60 ips) (at 45° direction)
Acceleration: 4.2 G
Offset: 0 ~ 1.0 mm (with an increase of 0.025 mm)
Memory Buffer: 32MB
Interfaces: USB 2.0 (Full Speed), Serial (RS-232C) and Ethernet
Type of Command: HP-GL, HP-GL/2
Mechanical Resolution: 0.006 mm
Software Resolution: 0.025 mm
Repeatability: ±0.1 mm
Distance Accuracy: ±0.254 mm or ±0.1% of move, whichever is greater
Automatic-Aligning System (AAS II): Yes
Curve & Arc Smoothing: Yes
Configurable Origin : Yes
Tangential- emulation: Yes
Repeat: Yes
Copy: Yes
Pouncing: Optional
Control Panel: LCD (20 digits x 2 lines), 14 Keys, 1 Power LED
Diameter of Blade: 2.5 mm
Power Supply: AC 100-240V, 50~60 Hz (auto switching)
Dimension (HxWxD) in: 16.2 * 37.4 * 19.1
Product Details:
Minimum Order Quantity | 1 Piece |
Driven Type | Electric |
Blade Material | Stainless Steel |
Classification | Double-blade Cutter |
Size | 24 inch |
Power | Max. 288 W |
Finish | Polished |
Packaging | Box |
xpert II Series | EX II-24 | EX II-24LX | EX II-52 | EX II-52LX | |
Max. Cutting Width | 600 mm (23.6 in.) | 1320 mm (51.96 in) | |||
Max. Media Width | 719 mm (28.3 in.) | 1635 mm (64.37”) | |||
Acceptable Material Thickness | 0.8 mm | ||||
Max. Cutting Force | 350 g | ||||
Max. Cutting Speed | 705 mm/sec (27.8 ips) (at 45 degree direction) |
635 mm/sec (25 ips) (at 45 degree direction) |
|||
Mechanical Resolution | 0.012 mm (0.00047 in.) | ||||
Software Resolution | 0.025 mm (0.00098 in.) | ||||
Distance Accuracy | ±0.254 mm or ±0.1% of move, whichever is greater | ||||
Repeatability | ±0.1 | ||||
Tracking | 3M | ||||
Memory Buffer | 1 MB / 500KB(when using AAS) | ||||
Type of Command | HPGL, HPGL/2 | ||||
Configurable Origin | Yes | ||||
Repeat | Yes | ||||
Copy | Yes | ||||
Control Panel | 6 LEDs / 10 Keys | ||||
Diameter of Blade | 2.5 mm | ||||
Dimension (HxWxD) mm | 233*880*255 | 1065*1632*620 | |||
Dimension (HxWxD) in | 9.1*34.6*10 | 41.93*62.25*24.41 | |||
Net Weight | 11KG (24.3lb) | 41KG (90.2lb) | |||
Stand | Optional | Standard | |||
Automatic-Aligning System (AAS II) |
Available on Expert II LX models | ||||
Power Supply | 100-240 VAC, 50 / 60 Hz (auto switching) | ||||
Power Consumption | Max. 288 W |
Product Details:
Minimum Order Quantity | 1 Piece |
Width Size | 24" |
Dimension | 233x880x255 mm (HxWxD) |
Diameter Of Blade | 2.5 mm |
Power Consumption | Max. 288 W |
Power Supply | 100-240 VAC,50 / 60 Hz (auto switching) |
Net Weight | 11KG (24.3lb) |
Repeatability | +-0.1 |
Memory Buffer | 1 MB / 500KB(when using AAS) |
Distance Accuracy | +-0.254 mm or +-0.1% of move,whichever is greater |
Max Cutting Width | 600 mm (23.6 in.) |
Max Media Width | 719 mm (28.3 in.) |
Acceptable Material Thickness | 0.8 mm |
Max Cutting Force | 350 g |
Max Cutting Speed | "705 mm/sec (27.8 ips) (at 45 degree direction)" |